1. Improve the awareness of tire safety, usually to check the tires, especially before the high-speed, must do a full and careful inspection, in addition to tire pressure, but also observe whether there are cracks on the side of the tire, tread wear, found hidden dangers should be eliminated in time.

2. Install a set of tire pressure monitoring system on the car, the car tire pressure monitoring is a simple system, composed of four professional tire valves and a display screen. The original four valve cores of the tires were replaced during installation and the display screen was placed in the car. When driving, the display will show the tire pressure and tire temperature of the four tires, if the tire pressure and tire temperature is abnormal, the instrument will automatically alarm. It prevents blowouts.

3. Tire anti-puncture treatment Car tire anti-puncture treatment is to spray a protective film on the inner wall of the tire, and when the tire encounters sharp objects, it can be well wrapped to ensure that the tire will not leak. Usually spray 3-5mm protective film evenly on the inner wall of the tire, you can resist the damage of sharp objects below 6mm. All passenger car tires currently on the market can do this kind of anti-puncture treatment.

4. Regularly changing the tire position is a good way to prevent tire blowouts, which can make the tires on the same car wear evenly. It is recommended that the vehicle should do a tire shift every 5000 kilometers, and do a four-wheel positioning every 5000~10000 kilometers to avoid abnormal excessive wear of the tire, and it is not allowed to install different models or tires with large differences between the old and the new on the same shaft.

5. Regularly correct the wheel balance, the wheel unbalance exceeds the standard, and high speed driving will produce high-frequency swing, resulting in tire bias, which is not conducive to driving safety. Therefore, the tire should be adjusted after repair.